Hard sphere model

The hard sphere model is defined as

${\mathrm{\Phi }}_{12}(r)=\{\begin{array}{ccc}\mathrm{\infty }& ;& r<\sigma \\ 0& ;& r\ge \sigma \end{array}$

where ${\mathrm{\Phi }}_{12}(r)$ is the intermolecular pair potential between two spheres at a distance $r:=|{\mathbf{r}}_1-{\mathbf{r}}_2|$, and $\sigma$ is the diameter of the sphere. The hard sphere model can be considered to be a special case of the hard ellipsoid model, where each of the semi-axes has the same length, $a=b=c$.

First simulations of hard spheres

The hard sphere model, along with its two-dimensional manifestation hard disks, was one of the first ever systems studied using computer simulation techniques with a view to understanding the thermodynamics of the fluid and solid phases and their corresponding phase transition

Fluid phase radial distribution function

The following are a series of plots of the hard sphere radial distribution function . The horizontal axis is in units of $\sigma$ where $\sigma$ is set to be 1. Click on image of interest to see a larger view.

$\rho =0.2$	$\rho =0.3$	$\rho =0.4$
$\rho =0.5$	$\rho =0.6$	$\rho =0.7$
$\rho =0.8$	$\rho =0.85$	$\rho =0.9$

The value of the radial distribution at contact, $\mathrm{g}({\sigma }^{+})$, can be used to calculate the pressure via the equation of state (Eq. 1 in )

$\frac{p}{\rho k_{B}T}=1+B_2\rho \mathrm{g}({\sigma }^{+})$

where the second virial coefficient, $B_2$, is given by

$B_2=\frac{2\pi }{3}{\sigma }^3$.

Carnahan and Starling provided the following expression for $\mathrm{g}({\sigma }^{+})$ (Eq. 3 in )

$\mathrm{g}({\sigma }^{+})=\frac{1-\eta /2}{(1-\eta {)}^3}$

where $\eta$ is the packing fraction.

Over the years many groups have studied the radial distribution function of the hard sphere model:

Fluid-solid transition

The hard sphere system undergoes a fluid-solid first order transition The fluid-solid coexistence densities (${\rho }^{*}=\rho {\sigma }^3$) are given by

$\underset{\mathrm{s}\mathrm{o}\mathrm{l}\mathrm{i}\mathrm{d}}{\overset{*}{\rho }}$	$\underset{\mathrm{f}\mathrm{l}\mathrm{u}\mathrm{i}\mathrm{d}}{\overset{*}{\rho }}$	Reference
1.041	0.945
1.0376	0.9391
1.0367(10)	0.9387(10)
1.0372	0.9387
1.0369(33)	0.9375(14)
1.037	0.938
1.035(3)	0.936(2)

The coexistence pressure is given by

$p(k_{B}T/{\sigma }^3)$	Reference
11.567
11.57(10)
11.54(4)
11.50(9)
11.55(11)
11.48(11)

The coexistence chemical potential is given by

$\mu (k_{B}T)$	Reference
15.980(11)

The Helmholtz energy function (in units of $N{k}_{B}T$) is given by

$A_{\mathrm{s}\mathrm{o}\mathrm{l}\mathrm{i}\mathrm{d}}$	$A_{\mathrm{f}\mathrm{l}\mathrm{u}\mathrm{i}\mathrm{d}}$	Reference
4.887(3)	3.719(8)

Helmholtz energy function

Values for the Helmholtz energy function ($A$) are given in the following Table:

${\rho }^{*}$	$A/(N{k}_{B}T)$	Reference
0.25	0.620 $\pm$ 0.002	Table I
0.50	1.541 $\pm$ 0.002	Table I
0.75	3.009 $\pm$ 0.002	Table I
1.04086	4.959	Table VI
1.099975	5.631	Table VI
1.150000	6.274	Table VI

Solid structure

The Kepler conjecture states that the optimal packing for three dimensional spheres is either cubic or hexagonal close packing, both of which have maximum densities of $\pi /(3\sqrt{2})\approx 74.048\%$ . However, for hard spheres at close packing the face centred cubic phase is the more stable

• See also: Equations of state for crystals of hard spheres

Direct correlation function

For the direct correlation function see:

Bridge function

Details of the bridge function for hard sphere can be found in the following publication

Equations of state

Main article: Equations of state for hard spheres

Virial coefficients

Main article: Hard sphere: virial coefficients

Experimental results

Pusey and van Megen used a suspension of PMMA particles of radius 305 $\pm$10 nm, suspended in poly-12-hydroxystearic acid For results obtained from the Colloidal Disorder - Order Transition (CDOT) experiments performed on-board the Space Shuttles Columbia and Discovery see Ref.

Mixtures

• Binary hard-sphere mixtures
• Multicomponent hard-sphere mixtures

Related systems

• Quantum hard spheres
• Dipolar hard spheres
• Lattice hard spheres

Hard spheres in other dimensions:

• 1-dimensional case: hard rods.
• 2-dimensional case: hard disks.
• Hard hyperspheres

References

Related reading

• "Theory and Simulation of Hard-Sphere Fluids and Related Systems", Lecture Notes in Physics 753/2008 Springer (2008)

External links

• Hard disks and spheres computer code on SMAC-wiki.